OmniScan MX2 — Getting Started Guide
7
Turning On and Off the OmniScan MX2
To turn on the OmniScan MX2
Press the Power key.
The system starts up and performs a memory check.
If the system encounters a problem during its start-up phase, the power indicator light uses a color
code to identify the nature of the problem. Refer to the
OmniScan MX2 User’s Manual
for more
details.
To turn off the OmniScan MX2
1.
Quickly press the Power key.
The “Select a command” message appears.
2.
Select
Shut Down
.
A message asking you if you want to save your setup appears.
3.
To save your setup, select
Yes
.
You can also turn off the OmniScan MX2 by pressing and holding the Power key for ten seconds.
However, your setup will NOT be saved.
Sleep Mode
The OmniScan MX2 can be put into sleep mode when not in use to conserve power.
To use the sleep mode
1.
With the OmniScan MX2 turned on, quickly press the Power key.
The “Select a command” message appears.
2.
Select
Sleep
.
3.
To disable the sleep mode, quickly press the Power key.
The OmniScan MX2 returns to its previous state (inspection or analysis mode).
The Shut Down
button
The Sleep button
