22
Chapter 3 Installation and Connection
High definition LCD monitor OEV261H
1.
Align the LCD monitor mount mounting screw holes on the rear of the
instrument with the mounting screw holes on the LCD monitor mount
(see upper figure).
2.
Fix the monitor onto the LCD monitor mount using the six screws
provided with the monitor.
• Ensure that the monitor is fixed firmly to the LCD monitor
mount. Otherwise, the monitor may drop and cause injury to
the operator or damage the monitor.
• Use a monitor mount with sufficient load resistance to
support the weight of the monitor. If the monitor falls, patient
or operator injury and/or equipment damage may result.
• Do not use screws other than those provided with the LCD
monitor. Otherwise, the monitor cannot be fixed firmly to the
LCD monitor mount and the monitor may drop, causing injury
to the operator or damage the LCD monitor.
• Do not install the monitor on mobile workstations other than
those listed in this instruction manual. Otherwise, the mobile
workstation may tip, injury to the operator or damage of the
monitor/equipment on the mobile workstation may result.
100 × 100 mm
Screw hole for attaching
LCD arm
(for VESA)
100 × 200 mm
Screw hole for attaching
LCD arm
(for WVESA)