6
NORTEC 600 — Getting Started Guide
Proceed as follows:
In the PowerLink recognition screen, load the program stored in the PowerLink probe to set up
the instrument by pressing the A function key.
The
KEEP LAST SETTINGS
function lets you load the previous parameters if they are
compatible with the probe or accessory that is detected.
This automatically sets up the instrument.
OR
Bypass the stored program in the probe by pressing the Return key (
) to gain access to the
instrument’s main inspection screen.
Main Inspection Screen
After the initial steps through the quick-setup menu or PowerLink menu, the main inspection screen is
displayed.
The battery power indicator always remains visible at the top of the screen, except when in full-screen
mode. The time and date also always remain visible, except when in full-screen mode.
The rectangular readout in the top-left corner of the screen is named the quick-access bar. It displays
either the instrument’s combined horizontal and vertical gain settings, horizontal gain only, vertical
gain only, or angle setting when the GAIN (
) or ANGLE (
) direct-function keys are
pressed. The quick-access bar remains visible until any other key is pressed.
