NORTEC 600 — Getting Started Guide
5
Starting Up the Instrument
When power is turned on, the NORTEC 600 starts up in one of two modes, depending on what is
connected to the instrument.
If no probe is connected, or if a probe that is not a PowerLink type of probe is connected, the first
screen displayed by the NORTEC 600 software is the application quick-setup menu. Choose from
among the basic applications on this menu to automatically configure the appropriate instruments
settings.
The NORTEC 600 applications are designed for quick setup of the instrument. However, always
follow published maintenance procedures when inspecting.
Navigating the Application Menu
Navigating the menu is designed to be intuitive, and the settings for each application have been
programmed to permit immediate inspection; little or no additional instrument setup is needed.
1.
Rotate the knob to highlight one of the eight applications.
2.
Press the Enter key (
) to select the application.
OR
Press the Return key (
) to go back to the NORTEC 600 main screen.
Alternatively, if a PowerLink probe is connected to the instrument when it is turned on, the
NORTEC 600 starts up in the PowerLink recognition screen.
NOTE
