Olympus NEWPIC Zoom 90 Instructions Manual Download

Page: 50 / 57

TROUBLESHOOTING

OPERATING PROBLEMS

The camera does not work.

The power is OFF.

Set the power switch to ON. (p. 21)

The battery is loaded incorrectly.

Reload the battery correctly. (p. 15)

The battery is exhausted.

Replace the battery with a new one. (p. 16)

The battery performance has dropped due to cold.

Keep the camera warm while using it. (p. 48)

The cartridge has been exposed and rewound.

Remove the cartridge. (p. 26)

The cartridge is inserted incorrectly.

Remove the cartridge and re-insert correctly. (p. 19)

The flash indicator lamp blinks and the shutter cannot be

released.
The flash is not yet completely recharged.

Remove your finger from the shutter release button, wait

several seconds until recharging is completed, and then take

the picture. (p. 33)

The flash will not fire even when the light level is low.

The Flash Off mode has been set.

Set another flash mode. (p. 35)

Summary of Contents for NEWPIC Zoom 90


























































Search results

Summary of Contents for NEWPIC Zoom 90

Reviews:

Related manuals for NEWPIC Zoom 90

Brands by name

Popular brands

Olympus NEWPIC Zoom 90, Instructions Manual

Search results

Summary of Contents for NEWPIC Zoom 90

Reviews:

Related manuals for NEWPIC Zoom 90

Brands by name

Popular brands