![background image](http://html1.mh-extra.com/html/olympus/im008/im008_instruction-manual_734545087.webp)
Shooting
2
87
EN
Reducing camera shake ( Image Stabilizer)
You can reduce the amount of camera shake that can occur when shooting in low light
situations or shooting with high magni
fi
cation.
The image stabilizer starts when you press the shutter button halfway.
1
Press the
u
button in
P
/
A
/
S
/
M
modes.
• In
B
,
ART
,
SCN
, and
Z
modes, the display of the
LV super control panel is controlled via [
K
Control
Settings] (P. 122).
2
Use
FGHI
to select [Image Stabilizer], then
press the
Q
button.
3
Highlight an option using
HI
and press the
Q
button.
250
250 F5.6
P
1023
1:02:03
sRGB
Natural
S-AF
N
FHD
60p
S
Normal
WB
Auto
ISO
Auto
M-IS
S-IS On
±
0
A ± 0
±
0.0
±
0
±
0
±
0
G ± 0
K
Image Stabilizer
n
Image
Stabilizer
K
Image
Stabilizer
Still picture
(S-IS)
S-IS Off
Image stabilizer is off.
S-IS On
The camera detects the panning direction and applies the
appropriate image stabilization.
Movie
(M-IS)
M-IS Off Image stabilizer is off.
M-IS
The camera uses both sensor shift (VCM) and electronic
correction.
M-IS
The camera uses sensor shift (VCM) correction only.
Electronic correction is not used.
• The edges of the frame are cropped out when [M-IS ] is selected, reducing the area
recorded.
• The image stabilizer cannot correct excessive camera shake or camera shake that occurs
when the shutter speed is set to the slowest speed. In these cases, it is recommended
that you use a tripod.
• When using a tripod, set [Image Stabilizer] to [S-IS Off]/[M-IS Off].
• When using a lens with an image stabilization function switch, priority is given to the lens
side setting.
• You may notice an operating sound or vibration when the image stabilizer is activated.
Using lenses other than Micro Four Thirds/Four Thirds System lenses
You can use focal length information to reduce camera shake when shooting with lenses that
are not Micro Four Thirds or Four Thirds system lenses.
• Press the
INFO
button while [Image Stabilizer] is selected, use
FGHI
to highlight a
focal length, and press the
Q
button.
• Choose a focal length between 0.1 mm and 1000.0 mm.
• Choose the value that matches the one printed on the lens.
• Selecting [Reset] (basic) in Shooting Menu 1 does not reset the focal length.
Summary of Contents for IM008
Page 186: ......
Page 187: ...WD398900 date of issue 2018 01...