Olympus i-SPEED 2, Instructions Manual

Page: 6 / 116

4
i
--SPEED LT,
i
--SPEED 2
11.
The measurement suite is intended to give a good
indication of relative object distance, speed and angle.
However, due to the number of variable factors involved,
no guarantee of measurement accuracy can be given.
12.
The power supply provided must be connected to a
suitably grounded AC outlet.
13.
Avoid subjecting the unit to heavy knocks or shock
loadings, as these will reduce the effective life and
reliability of the components within the unit.
14.
Before operating the unit, check that cooling vents are
not blocked or obstructed.
15.
Do not remove the compact flash card while writing,
deleting or formatting is in progress. This may result in
corrupt data being saved or damage to the compact flash
card.
General notes
S
The
i
-- SPEED LT
and
i
-- SPEED 2
software runs on
Microsoft Windows 2000 or Windows XP. For the basic
operating procedures of these operating systems, refer
to the operating system manual.
S
Microsoft, Windows, Windows NT and MS-DOS are
either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
S
Acrobat Reader is either registered trademark or
trademark of Adobe Corporation in the United States
and/or other countries.
S
Quick Time is either registered trademark or trademark
of Apple Computer Inc in the United States and/or other
countries.