Olympus i-SPEED 2, Instructions Manual

Page: 43 / 116

Software reference (CDU) i--SPEED LT
41
i
--SPEED LT,
i
--SPEED 2
9.
Trigger Setup Menu
This menu makes available all the items which relate to the live
view systems of the camera. It would be of benefit to read Chapter
8 “Understanding the Olympus
i
-- SPEED LT” for further
descriptions on several of the terms and phrases used in this
section.
Access :
i
-- SPEED LT Home
'
Setup
'
Trigger Setup
Options : Trigger mode Trigger edge Trigger pos Burst time
Clear last Clear mem
S
The CDU will display the live image
`
Trigger Mode Control
This control is used to change the camera into Record On
Command (ROC) mode or Burst Record On Command (BROC)
mode.
`
Trigger Edge Control
This control sets the trigger detection system to wait for a rising
edge or a falling edge on the trigger input connection.
NOTE
This control is not available in ROC mode, since ROC is
not edge triggered.
This value is stored in non--volatile memory. After a
power cycle, it will be set to the last used position.