Olympus FV1000 -4- Short instructions
5.
Changing objectives:
Never change the objectives manually!
To change objectives use the microscope control menu within the Olympus
software or the panel box left of the microscope stand.
6.
Changing the specimen:
Before you change the specimen, drive down the objective nosepiece.
Don’t forget to remove the old oil from the objective before you add new ones.
7.
Lasers:
Lasers for the lines 491, 532, and 559 nm have to be switched on manually. Read
chapter 3 for details.
8.
Data transfer:
Never store any data on the microscope computer.
There are three ways to transfer your data from the microscope computer:
a.
Transfer through the MHH network. Save your data on hard disk P: of your
department.
b.
USB-sticks or movable hard disks connected via USB. The USB sockets are
located at the back of the computer.´
c.
Writable CDs. This computer supports only CD-R, -RW. Other formats will
not be recognized. Open the Nero Start Smart software and follow the
instructions.
