EN
19
Turning on the electronic fl ash
Turning on the electronic fl ash
Attach an electronic fl ash to the camera, and then turn the camera on.
TEST
button/
CHARGE
lamp
ON/OFF
button
1
Press and hold the
ON/OFF
button until any lamp lights.
Press the
ON/OFF
button again to turn the power off.
Press the
TEST
button to fi re a test fl ash when the
CHARGE
lamp lights.
•
•
Replace the batteries if the
CHARGE
lamp does not light after:
30 seconds (Alkaline batteries)
10 seconds (NiMH batteries)
If the
CHARGE
lamp and
AUTO CHECK
lamp blink simultaneously, batteries are running
low. Replace the batteries.
If no operations are performed for about 15 minutes, the fl ash will enter sleep mode to
save power. The fl ash will also enter sleep mode whenever the camera enters sleep mode.
If no operations are performed for approximately 60 minutes more, the fl ash will turn off
automatically. Press the
ON/OFF
button to turn it on.
•
•
•
book̲R2190̲JUGC.indb 19
book̲R2190̲JUGC.indb 19
2011/03/21 11:15:36
2011/03/21 11:15:36
