![background image](http://html2.mh-extra.com/html/olympus/evolt-e-300/evolt-e-300_advanced-manual_4252869062.webp)
4
V
arious shooting functions
62
Using the electronic flash
The following instructions describe how to connect and use the FL-50 electronic
flash (optional). Be sure to attach the flash to the camera before turning on the
flash’s power.
1
Remove the hot shoe cover by sliding
it in the direction indicated by the
arrow in the illustration.
●
Keep the shoe cover in a safe place to avoid
losing it, and put it back on the camera after
flash shooting.
2
Attach the FL-50 electronic flash to
the hot shoe on the camera.
●
If the lock pin is protruding, turn the shoe lock
dial as far as it will go in the direction
opposite to
ß
LOCK. This will pull the lock
pin back inside.
●
For instructions on how to attach the flash,
refer to the FL-50’s manual.
3
Turn on the flash.
●
When the charge lamp on the flash lights up,
charging is complete.
●
The flash will be synchronized with the
camera at a speed of 1/180 sec or less.
4
Select a flash mode.
~
“Selecting the flash mode” (P. 58)
(flash mode) button
Lock pin
Shoe lock dial
P A S M
Available modes
Flash shooting
04E-300EN-P53 04.10.22 11:22 AM Page 62
Summary of Contents for EVOLT E-300
