Olympus E-P1 - Digital Camera - Prosumer, Instruction Manual

Page: 96 / 164

96
EN
Setup f
u
nc
ti
ons
8
In
P
,
A
,
S
, or
M
mode, current camera settings (including any changes you have made)
are retained when the power is turned off. To reset the camera to the factory default
settings, set
[RESET] . You can register settings in advance to [RESET1] and [RESET2] .
The camera settings at that time are registered in [RESET1] and [RESET2] . For details on
the registered functions, refer to “Functions that can be registered with My Mode and
Custom Reset Setting” (
g
P. 141).
Registering [RESET1]/[RESET2]
1
Select either [RESET1]/[RESET2] to register and press
i
.
• If settings have already been registered, [SET] is displayed next to [RESET1] / [RESET2] .
Selecting [SET] again overwrites the registered setting.
• To cancel the registration, select [RESET] .
2
Select [SET] and press the i button.
Using reset settings
This resets the camera to the factory default settings. You can also reset the camera to the
[RESET1] or [RESET2] setting.
[RESET] Resets to the factory default settings. For the default settings, see
“Menu directory” (
g P. 142).
[RESET1]/[RESET2] Resets to the registered settings.
1
Select [RESET], [RESET1], or [RESET2] and press
the
i button.
2
Use
fg
to select [YES], then press the i
button.
Resetting the camera settings
Menu
MENU
[
W
] [CUSTOM RESET]
Menu
MENU
[
W
] [CUSTOM RESET]
RESET1
YES
NO
BACK SET
s0019_e_00_0_unified.book Page 96 Friday, April 24, 2009 9:21 AM