Olympus E-P1 - Digital Camera - Prosumer, Instruction Manual

Page: 73 / 164

73
EN
5
Fl
as
h shooting
5
Flash shooting
With this camera, you can use one of the separately sold external flash units to achieve a
flash suited to your needs.
The external flashes communicate with the camera, allowing you to control the camera’s
flash modes with various available flash control modes, such as TTL-AUTO and Super FP
flash. An external flash unit specified for use with this camera can be mounted on the camera
by attaching it to the camera’s hot shoe. You can also attach the flash to the flash bracket on
the camera using the bracket cable (optional).
Refer to the external flash’s manual as well.
Functions available with external flash units
* The focal length of the lens that can be used (Calculated based on 35 mm film camera)
Using the external electronic flash
Be sure to attach the flash to the camera before turning on the flash’s power.
1
Remove the hot shoe cover by sliding it
in the direction indicated by the arrow in
the illustration.
• Keep the shoe cover in a safe place to avoid
losing it, and put it back on the camera after
flash shooting.
2
Attach the electronic flash to the hot
shoe on the camera.
• If the lock pin is protruding, turn the shoe lock
ring as far as it will go in the direction opposite
to LOCK. This will pull the lock pin back
inside.
External flash shooting
Optional flash
FL-50R FL-36R FL-20 FL-14 RF-11 TF-22
Flash control mode
TTL-AUTO, AUTO, MANUAL,
FP TTL AUTO, FP MANUAL
TTL-AUTO, AUTO, MANUAL
TTL-AUTO,
MANUAL
GN
(Guide number)
(ISO100)
GN50
(85 mm
*
)
GN28
(24 mm
*
)
GN36
(85 mm
*
)
GN20
(24 mm
*
)
GN20
(35 mm
*
)
GN14
(28 mm
*
)
GN11 GN22
Hot shoe
cover
Lock pin Lock ring
s0019_e_00_0_unified.book Page 73 Friday, April 24, 2009 9:21 AM