134
9
Notes on Recording For Voice Recognition
When recording voice to be processed
with voice recognition, set up your
recorder as follows to improve
recognition accuracy.
• Set the microphone sensitivity to [DICT].
(
☞
P35)
• Set the recording mode other than [LP]
mode. (
☞
P32)
• Set the Variable Control Voice Actuator
(VCVA) to [Off]. (
☞
P28)
• Register/enroll your voice in the voice
recognition software using the recorder.
• Record in a relatively quiet environment.
• Have the recorder microphone 5 to 10
cm away from your chin.
The file recorded in the next condition,
will be a low rate of recognition, which
can not be used for voice recognition.
• A conference or meeting where many
voices are recorded.
• Seminar or lecture where high-level
ambient noise tends to be recorded.
• Speak normally.
• When your voice is to be recorded, and
reduce the influence of the surrounding
noise, and use the ME12 microphone
for dictation recording.
Using
V
oice Recognition Software
Using Voice Recognition Software
