9
Using the AC Adapter
Plug the optional AC adapter (Olympus Model
A321 or A322) into household power outlet and
connect the power plug to the recorder’s power
connector (DC 3 V) as shown in the illustration.
Always stop recording before connection.
Otherwise it may not be possible to play back
the voice data being recorded.
•
Always stop recording before connection
or disconnection.
•
When the AC adapter is not in use,
disconnect the power supply plug from
the power outlet.
•
Use only the correct power supply voltage
as indicated on the adapter.
•
Do not use the AC adapter when
connecting the recorder to the USB port.
Using the
AC
Adapter / Hold
Hold
Setting the
HOLD
switch to the HOLD
position.
If you set the recorder to HOLD status by sliding
the
HOLD
switch in the direction of the arrow, the
current conditions will be preserved, and all buttons
and switches except the
HOLD
switch will be
disabled. This feature is useful when the recorder
has to be carried in a bag or pocket.
Remember to reset the HOLD switch when
using the recorder.
Notes
• If you set the recorder to hold during Stop mode,
the display goes dark. If you press any button, the
time will flash for about 2 seconds, but the function
of the button is disabled.
• The alarm will sound at the scheduled time even if
the recorder is set to hold. The recorder begins to
play the file associated with the alarm when you
press any button.
• If you are recording when you switch the recorder
to HOLD, recording will continue until the recorder
memory runs out.
HOLD
