Olympus DS-2400 Instructions Manual Download

Page: 54 / 64

Connecting Recorder to PC

Connecting to Your PC Using the USB Cable

Connect the USB cable to the USB port of the PC.

Confirm that the recorder has stopped and connect a USB
cable to the connection port on the recorder.

If [Remote] is displayed on the recorder, it indicates proper connections.

Once you connect the recorder to your PC, the recorder will be powered
through the USB cable.
While PC connection, the SD card is recognized as the respective
removable disk drive.

Disconnecting from Your PC

Click the

on the task bar located at the lower-right corner

of the screen. Click [Safely Remove Hardware].

The drive letter will differ depending on the PC being used.

Disconnect the USB cable.

Macintosh

Windows

Move the icon of the recorder's drive displayed on desktop to trash
box by drag and drop.

Disconnect the USB cable.

Summary of Contents for DS-2400

































































Search results

Summary of Contents for DS-2400

Reviews:

Related manuals for DS-2400

Brands by name

Popular brands

Olympus DS-2400, Instructions Manual

Search results

Summary of Contents for DS-2400

Reviews:

Related manuals for DS-2400

Brands by name

Popular brands