![background image](http://html2.mh-extra.com/html/olympus/dp21/dp21_instructions-manual_4068174027.webp)
23
SAL System
Fig. 18
1
8
Recording Still Images
1. On the microscope, frame the image to be recorded and focus on it.
Tip
To facilitate focusing, use the zoom display of the live image (p. 27) or
display the focusing indicator (p. 37).
2. Press the EXPOSE button @ to record the still image, which is saved in
the USB memory connected to the control box or hand switch.
}Switching the Rec View setting (p. 34) ON displayed the recorded image
temporarily during live image display. (With the default, the recorded im-
age is displayed for 5 second after recording.)
3. The ACCESS LED lights during recording of the image. Message “Saving
image” is also displayed on the center of the screen.
4. The INFO display shows the number of remaining image.
When the number of remaining image reaches 0, warning
message “MEMORY FULL” is displayed on the monitor screen.
Tip
The image save destination can be changed (p. 31). The image can
also be saved in the networked PC by advance setting.
CAUTION
· Do not disconnect the USB memory while the ACCESS LED ² is
lighting.
· As the data quantity varies depending on the recording target, more
images than the number of remaining image may sometimes be
recordable. Also, the counter may not decrement after recording or
may not increment even when an image is erased.
· The number of remaining image varies depending on the capacity
of the USB memory.
· The USB memory has its own service life. Its capacity may decrease
depending on its conditions.
· It is not possible to record more than 10,000 images even when the
USB memory has a remaining idle capacity.
· The folder and file names of the recorded images are created auto-
matically. See page 33 for details.
²
CAUTION
Summary of Contents for DP21
Page 96: ...MEMO...
Page 97: ......