126
Chapter 10
Troubleshooting (Cont.)
POSSIBLE CAUSES
CORRECTIVE ACTION
REF. PAGE
1
The flash is pushed
down.
2
The subject is lighted.
3
The drive mode is set
to auto-bracketing.
4
The drive mode is set
to sequential shooting
or AF sequential
shooting when using
the Red-Eye Reduction
or Night Scene With
Red-Eye Reduction
flash mode.
5
You are recording
movies.
6
Panorama shooting is
set.
1
Press the flash switch to
raise the flash.
2
Set the flash to Fill-In mode.
3
Press DRIVE to change to
single-frame shooting.
4
Press DRIVE to change to
single-frame shooting.
5
Set the mode dial to any
position other than
.
6
Cancel the Panorama mode.
P. 62
P. 62
P. 71
P. 71
P. 44
P. 75
The date recorded with the image data is wrong.
1
The date is not set.
2
The camera has been
left for too long with the
batteries removed and
the date/time setting
was canceled.
1
Set the date. The clock
adjustment is not factory-
preset.
2
Set the date again.
P. 29
P. 29
Your customized settings have been canceled.
1
You turned off the
power without saving
the settings.
1
Set ALL RESET to OFF.
P. 104
The flash does not fire.
