manualshive.com logo in svg

Olympus CAMEDIA C-3040 Zoom, Instructions Manual

Share
Download
Olympus CAMEDIA C-3040 Zoom Instructions Manual Download Page 205

205

9

Downloading Images to a Computer

A list of the stored pictures is displayed. To view an image
at full size, position the cursor over the desired image and
double-click the mouse button.

To download images, click
the "My Camera" icon and
select "Download All(D)"
in the "Camera(C)" menu.

●

The images are downloaded
from the camera to the computer.

●

The "Camera(C)" option is only
valid for cameras connected
via a serial cable.

4

3

Downloading images using CAMEDIA Master

•

Images downloaded to your computer can be viewed using the enclosed
CAMEDIA Master software. You can also view the images using any graphics
software that supports JPEG images (Paint Shop Pro, Photoshop, etc.) or web
browser software (Netscape Communicator, Microsoft Internet Explorer, etc.).
Refer to the manual for the respective software application for details.

•

Refer to the CAMEDIA Master online manual for more information on using
CAMEDIA Master.

Summary of Contents for CAMEDIA C-3040 Zoom





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands