manualshive.com logo in svg

Olympus CAMEDIA C-3040 Zoom, Instructions Manual

Share
Download
Olympus CAMEDIA C-3040 Zoom Instructions Manual Download Page 156

156

6

Displaying, editing and erasing your pictures

Erasing all images (All-frame erase)

Press 

or 

to select

"YES".

●

To cancel image erasing,
select "NO" and press the
[OK] button.

When you press the [OK]
button, all the images on
the card are erased and
the "NO PICTURE" mes-
sage is displayed.

●

Protected images (P.144) are
not erased. If the card
includes protected images,
the last protected image is
displayed when erasing ends.

5

4

5

•

The time required for erasing varies depending on the number of images
recorded.

•

Take care not to mistakenly erase important data.

•

Take particular care not to open the card cover, eject the card, remove the
batteries or unplug the AC adapter while images are being erased as this
could destroy data on the card.

4

YES

OK

NO

YES

NO

Summary of Contents for CAMEDIA C-3040 Zoom





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands