With the lens barrier closed, press
to turn
the monitor on.
Press
or close the lens barrier and then
press
to switch to the playback mode.
NO PICTURE appears on the monitor. Record
pictures.
115
9
Miscellaneous
Troubleshooting
Pictures you have taken do not appear on the monitor.
The power is off.
The camera is in the
shooting mode.
There are no
pictures on the card.
P. 22
P. 68, 69
–
The date recorded with the image data is wrong.
The date/time is not
set.
The battery is
exhausted.
The camera has
been left with the
battery removed.
Set the date/time. The clock adjustment is not
factory-preset.
When the battery runs down, the date/time
setting is canceled.
Replace with a new battery and reset the date
and time.
If the camera is left for with the battery removed,
the date/time setting is canceled. Set the
date/time again.
P. 26
P. 14, 26
P. 26
ALL RESET is set to
ON.
Select the SETUP tab in the mode menu and set
ALL RESET to OFF.
P. 84
The brightness is not
adjusted properly.
Vertical lines appear
on the monitor.
The monitor is
exposed to direct
sunlight.
P. 88
P. 41
–
Select
in the MODE MENU and adjust the
brightness.
Bright light (such as sunlight) may cause this.
Use the viewfinder.
Block the sunlight with your hand.
The monitor is hard to see.
The settings are returned to the factory default settings when the camera is turned off.
Possible cause
Corrective action
Ref. Page
