Corrective action
Disconnect the camera and
connect it again correctly.
Load some paper in the printer.
Replace the ink cartridge in the
printer.
Remove the jammed paper.
Do not manipulate the printer
while making settings on the
camera.
Turn off the camera and printer.
Check the printer and remedy
any problems before turning the
power on again.
111
If an error code is displayed
8
Direct printing (PictBridg
e)
Possible cause
The camera is not
connected to the printer
correctly.
There is no paper in the
printer.
The printer has run out
of ink.
The paper is jammed.
The printer’s paper
cassette has been
removed or the printer
has been manipulated
while making settings
on the camera.
There is a problem with
the printer and/or
camera.
Monitor indication
NO CONNECTION
NO PAPER
JAMMED
SETTINGS CHANGED
PRINT ERROR
NO INK
If an error code appears on the camera’s monitor during direct print setting
or printing, see the following table.
For more details, refer to the printer’s instruction manual.
TIPS
• If an error code other than those shown above is displayed, refer to
~
"Error codes" (P. 112).
