Olympus C5500 - Camedia 5.1MP Digital Camera Advanced Manual Download Page 42

Page: 42 / 199

Flash shooting

asi

c sh

ncti

TIPS

The

(flash charge) indication blinks.

→

The flash is charging. Wait until

and the orange lamp beside the

viewfinder turn off.

Shutter speed when using the flash (auto-flash, red-eye reduction, fill-in
flash).

• When

(camera movement warning) lights, the shutter speed locks at its

current level. This helps prevent camera shake problems (shutter speeds

that are too slow can cause blur). However, if the zoom magnification is

increased, the camera will increase the locked shutter speed accordingly.

Function restrictions according to mode

• Fill-in flash and slow synchronization is not available in

mode.

• [AUTO], [

], [

], and [

SLOW

] are not available in

and

modes.

• The factory default setting for

and

modes is [

SLOW1

]. For all other

modes the default setting is [AUTO].

Note

• The flash does not fire in the following situations:

During [

(SUNSET)], [

(CANDLE)], [

(AVAILABLE LIGHT

PORTRAIT)] in scene mode, and during sequential shooting ([

], [

]),

super macro shooting and panorama shooting.

• The flash may not give you the optimum result in macro mode with the zoom

set to wide-angle (W). Check the resulting picture on the monitor.

Zoom position Shutter speed
W (max.)

1/30 sec.

T (max.)

1/160 sec.

d4250_e_00_0_bookfile.book Page 42 Friday, December 24, 2004 11:45 AM

Summary of Contents for C5500 - Camedia 5.1MP Digital Camera








































































































































































































Search results

Summary of Contents for C5500 - Camedia 5.1MP Digital Camera

Reviews:

Related manuals for C5500 - Camedia 5.1MP Digital Camera

Brands by name

Popular brands

Olympus C5500 - Camedia 5.1MP Digital Camera, Advanced Manual

Search results

Summary of Contents for C5500 - Camedia 5.1MP Digital Camera

Reviews:

Related manuals for C5500 - Camedia 5.1MP Digital Camera

Brands by name

Popular brands