172
7
(B) Double-click
on the task bar.
1
Double-click on the “Unplug or Eject Hardware” icon (circled in the illustration
below) on the task bar (displayed at the bottom right on a personal computer).
2
When the display for ejecting the hardware appears, select the camera from the
hardware device list, then click on the Stop button.
3
When a message appears saying that the hardware can be ejected safely, click
on the OK button.
4
Remove the USB cable.
Transferring images to a computer
— Downloading (Cont.)
Removing the USB cable
To remove the USB cable, do the following:
Windows 98/SE, Mac OS
Make sure the camera’s access lamp is off, then remove the USB cable.
Windows 2000/Me
Do either of the following to remove the USB cable:
(A) Click
on the task bar.
1
Left-click on the “Unplug or Eject Hardware” icon (circled in the illustration
below) on the task bar (at the lower right-hand side of your computer screen).
2
When a message appears saying that the driver has been stopped, left-click on
the message.
3
When a message appears saying that the hardware can be ejected safely, click
on the OK button.
4
Remove the USB cable.
~
Continued on next page
Summary of Contents for C-700 - CAMEDIA Ultra Zoom
