Olympus C-2/D-230, Basic Manual

Page: 13 / 164

13
En
En
Note
Erasure is also possible by pressing the button while the image you want to
erase is displayed and selecting [ ] on the Play menu.
Caution
• Erasure is not possible if the image to be erased is protected or a write protect
seal is attached to the SmartMedia card. Unprotect the image or remove the
write protect seal on the SmartMedia card before attempting to erase the
image.
• Once erased, images can not be restored. Check each image before erasing to
avoid accidentally erasing images you want to keep.
PROTECTING IMPORTANT IMAGES
Important images can be protected against accidental erasure.
1 Close the lens barrier and press the button.
The camera turns on in the Play mode.
2 Press the / buttons to display the image you want to protect.
See “Checking recorded images” ( p. 12).
3 Press the button for more than 1 second.
The selected image is protected and the symbol is displayed at the top
right of the image.
To cancel protection, display the image with the
symbol and press the
button for more than 1 second.
Note
• Protection is also possible by pressing the button while the image you
want to protect is displayed and selecting [ ] on the Play menu.
• The protect setting is saved even after the camera is turned off.
Caution
• Protected images can not be erased by “Erasing an image” or “Erasing all
images”, but they can be erased by formatting the card.
• Images on a SmartMedia card with a write protect seal attached can not be
protected.
1/Basic03_C2-E.65E 01.8.17, 10:04 AM 13