Olympus BXFM Instructions Manual Download Page 78 | Manualshive

Page: 78 / 88

background image

72

12

Attaching the light source for reflected light illumination

The light source for reflected light illumination must be attached
when the reflected light illuminator (BX3M-URAS-S or BX3M-
RLA-S) is combined with the microscope.
If you want to attach the reflected LED lamp housing or the
mercury lamp housing (during darkfield observation) when
BX3M-URAS-S is combined, the DF converter (U-RCV) must be
attached.

Loosen the mounting screws a (2 positions) of the reflected light

illuminator using the Allen screwdriver.

Be careful, if the mounting screw is loosened too much, it
may be come off.

Insert the light source for reflected light illumination or the liquid light
guide adapter into the light source mounting hole of the reflected light
illuminator until it touches the end.

When attaching the halogen lamp housing or the mercury
lamp housing, attach it so that the radiation fin faces up.

Do not light the mercury burner when the lamp housing is
not attached to the microscope because the UV rays in its
light are harmful to your eyes.

Tighten the mounting screws a (2 positions) of the reflected light
illuminator using the Allen screwdriver.

If the reflected LED lamp housing is attached, connect the cable
to the connector on the back of the power supply for LED (BX3M-
PSLED).
If the halogen lamp housing is attached, connect the cable to the
power supply (TH4).
If the mercury lamp housing is attached, connect the cable to the
power supply (U-RFL-T).

1

NOTE

2

NOTE

CAUTION

3

4

For connections of following units, refer to the instruction
manual provided with the respective unit.

· Cable connection of the reflected LED lamp housing

· Cable connection of the halogen lamp housing

· Cable connection of the mercury lamp housing

· Connection of the light source (U-HGLGPS) and the liquid

light guide, etc.

This picture

shows the procedure to attach the

reflected LED lamp housing (BX3M-LEDR).

The same procedure applies when attaching other
light sources.

2

a

«
...
76
77
78
79
80
...
»

Summary of Contents for BXFM

























































































Reviews:

No comments

Related manuals for BXFM

Brand: WPI Pages: 11

Brand: ViTiny Pages: 36

Brand: Accu-Scope Pages: 4

Brand: Accu-Scope Pages: 2

Brand: Unitron Pages: 20

Brand: National Pages: 8

Brand: National Pages: 6

Brand: National Pages: 8

Brand: National Pages: 7

Brand: OPTO-EDU Pages: 59

MED PRO 600 Fluo

Brand: Levenhuk Pages: 128

Brand: Levenhuk Pages: 6

OPTOSPLIT II BYPASS

Brand: Cairn Pages: 13

Brand: Zeiss Pages: 26

Brand: Velleman Pages: 9

Brand: Olympus Pages: 80

Brand: Frigidaire Pages: 2

Brand: Leica Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands