36
4
Various observation methods
4-1 Reflected light darkfield observation procedures
Remove the analyzer, polarizer or
filters from the light path.
Observation method selector knob of the
reflected light illuminator
(page 16)
Select the light path. (Trinocular tube only)
3
Turn ON the main switch.
1
Light path selection lever of the trinocular
tube
(page 18)
Main switch of power supply
(page 16)
Stage plate
(page 18)
X-axis / Y-axis knob of the stage
(page 18)
Nosepiece
(page 19)
Coarse / Fine focusing knob of the BXFM
frame
(page 20)
Brightness control knob of the power supply
(page 21)
Brightness control knob of the power supply
(page 21)
Binocular tube
(page 23)
Diopter adjustment ring
(page 23)
Nosepiece
(page 19)
Coarse / Fine focusing knob of the BXFM
frame
(page 20)
Aperture diaphragm knob of the reflected
light illuminator
(page 30)
Field diaphragm knob of the reflected light
illuminator
(page 27)
Select the darkfield (DF) observation.
2
Place a sample on the stand.
4
Engage the 10X objective in the light path.
5
Bring the sample into focus.
6
Adjust the interpupillary distance.
Adjust the diopter.
8
9
Adjust the brightness.
7
Engage the objective with the magnification to be used
in the light path and bring the sample into focus.
11
Open the aperture diaphragm, and
adjust the field diaphragm.
10
Adjust the brightness.
12
This section describes the operating procedures of the observations other than the reflected brightfield observation. The
operating procedures of the reflected brightfield observation are described in "3 Basic operations of the microscope
(brightfield observation)".
Start observation.
Summary of Contents for BXFM
Page 6: ......
Page 19: ...13 BXFM MEMO ...
