Olympus BXFM Instructions Manual Download

Page: 25 / 88

BXFM

3-6 Selecting the objective

When selecting the objective, be careful not to collide with
the sample.

When the manual or coded nosepiece is combined

Turn the nosepiece to select the objective.

NOTE

When the motorized nosepiece is combined

Press the button of the hand switch for motorized nosepiece (BX3M-
HSRE) to select the objective.

The nosepiece rotation direction specified by pressing the
button can be changed by setting the dip switch on the side
of the FM control box (BX3M-CBFM).
Before setting the dip switch, set the main switch to (OFF).

For settings of the dip switch, refer to the instruction manual
provided with the BX3M-CBFM.

TIP

When the motorized nosepiece and the hand switch are combined

The lighting of the OB indicator a of the hand switch (BX3M-HS) is
changed according to the selection of the objective.

Summary of Contents for BXFM

























































































Search results

Summary of Contents for BXFM

Reviews:

Related manuals for BXFM

Brands by name

Popular brands

Olympus BXFM, Instructions Manual

Search results

Summary of Contents for BXFM

Reviews:

Related manuals for BXFM

Brands by name

Popular brands