29
BX61
ASSEMBLY
7-1 Assembly Diagram
The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of assembly.
The BX61TRF microscope frame is assembled in the same procedures.
The module model numbers shown in the following diagram are merely the typical examples. For the modules with which
the model numbers are not given, please consult your Olympus representative or the catalogues.
# When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any parts
or touching glass surfaces.
Assembly steps enclosed in will be detailed on the subsequent pages.
}Most assembly operations are possible by using the Allen screwdriver ( ) provided with the microscope. How-
ever, the assembly of the reflected light illuminator requires the use of the provided Allen wrench ( ) for clamping the
internal screws (to ensure the performance, we recommend that you have your Olympus representative assemble or
remove this module).
Eyepiece
WHN10X (FN 22)
35WHN10X (FN 22)
SWH10X-H (FN 26.5)
35SWH10X (FN 26.5)
}For the electrical connections, refer to the instruction manual of the BX-UCB control box.
For the setup and installation of the Z-board, see page 30.
Observation tube
U-BI30-2 (FN 22)
U-TR30-2 (FN 22)
U-TR30NIR (FN 22)
U-TBI3 (FN 22)
U-SWTR-3 (FN 26.5)
U-ETBI (FN 22)
U-TTBI (FN 22)
Intermediate
attachment
U-EPA2
U-DO3
U-TRU, etc.
Tube clamping
screw
Slide holder
U-HLDT-4
U-HRDT-4
U-HLST-4
Revolving nosepiece
U-D6RE
U-D6REM
U-D6REMC, etc.
Specimen
holder
clamping
knobs
Stage clamping
knob
UIS2/UIS
series
objective
Stage
U-SVRB-4
U-SVLB-4
U-SRG
Condenser
U-SC3
U-AAC
U-UCD8A
Reflected light illuminator
BX-RFAA
BX-RLAA
Reflected
lamp
housing
Microscope frame
(Transmitted/reflected
light specification)
BX61TRF
100 W halogen bulb
12V100WHAL-L
12V50WHAL-L
100 W halogen
lamp housing
U-LH100-3
Revolving
nosepiece
clamping screw
Lamp socket
clamping screw
Microscope frame
(Transmitted light
specification)
BX61TRF
Condenser clamping
screw
