DMTA-10043-01EN, Rev. C, July 2016
Chapter 7
54
7.10.1
Resetting Measurement Parameters
The Measurement Reset function resets the measurement parameters to their default
values.
The parameters that are reset and their reset values are as follow:
•
Material Velocity (0.5740 mm/µs [0.2260 in/µs])
•
Transducer Zero
•
Measure Option (Standard)
•
Unit (Inches)
•
Resolution (Standard)
•
Min/Max (Off)
•
Hold/Blank (Blank)
•
Measure Rate (Normal)
•
CAL Lock (Off)
•
Beeper (On)
•
Inactive Time (On)
•
Radix (Period)
•
Backlight mode (Normal)
•
Alarm (Off). Default Values: Low 0.000; High 25.000
•
Diff (Off). Default Value 0.000
To reset measurement parameters
1.
Press
[2
nd
F] [
] (SETUP)
to display the setup tabs.
2.
Use the
[
,
]
keys to highlight the
RESET
tab.
3.
Use the
[
]
key to highlight
MEASUREMENT RESET
and press
[ENTER]
.
4.
Use the
[
,
]
keys to highlight
RESET
or
CANCEL
and press
[ENTER]
.
5.
Press
[MEAS]
to return to measurement mode.
7.10.2
Resetting the Entire Instrument Parameters
The Master Reset function resets the entire instrument parameters to their default
values.
Summary of Contents for 27MG
