Olympus 262090 Instruction Manual Download Page 77

Page: 77 / 148

Flash shooting

Set RC mode on the camera to [ON].

•

[

]

[

RC MODE]

[ON]

• The super control panel switches to RC mode.
• You can press the

INFO

button to switch the super control panel display.

Use the super control panel to set the flash mode and other settings for each
group.

Select a flash mode.

• Red-eye reduction flash is not possible in RC mode.

Press the

button to raise the built-in flash.

After shooting preparations are completed, take some test shots to check the
flash operation and images.

Begin shooting while checking the charging completed indications of the camera
and flash.

Notes

• Although there is no limit to the number of wireless flashes you can use, it is recommended

that each group have no more than three flashes to prevent flash malfunction due to mutual
interference.

• In RC mode, the built-in flash is used to control the wireless flash. The built-in flash cannot be

used for flash shooting in this mode.

• For 2nd curtain synchronization, set the shutter speed and anti-shock settings to within 4

seconds. Wireless flash shooting may not operate properly when using a slower shutter
speed or anti-shock setting.

TTL

1 / 8

–

+1.0

OFF

2008. 08.16

Flash control
mode

Group
• Select the flash

control mode and
adjust the flash
intensity individually
for groups A, B, and
C. For MANUAL,
select the flash
intensity.

Flash intensity value

Communication light level
• Set the communication light level

[HI]

[MID]

, or

[LO]

Channel
• Set the communication channel to

the same channel used on the
flash.

Normal flash/Super FP flash
• Switch between normal flash and

Super FP flash.

Flash
intensity

s0018_e_00_0_unified.book Page 77 Tuesday, March 18, 2008 4:08 PM

Summary of Contents for 262090





















































































































































Search results

Summary of Contents for 262090

Reviews:

Related manuals for 262090

Brands by name

Popular brands

Olympus 262090, Instruction Manual

Search results

Summary of Contents for 262090

Reviews:

Related manuals for 262090

Brands by name

Popular brands