Olympus 262090 Instruction Manual Download Page 125

Page: 125 / 148

125

rmatio

In the

mode, the camera is programmed such that the aperture value and shutter speed

are automatically selected according to the subject’s brightness as shown below. The
program line diagram varies with the type of lens mounted.

If the optimum exposure cannot be obtained when pressing the shutter button halfway, the
display will blink in the viewfinder and on the super control panel.

Program line diagram (

mode)

When using the
14 - 42 mm f3.5 - 5.6
zoom lens
(focal length: 14 mm,
ISO100)

Program shift

Exposure warning display

Shooting

mode

Warning display

example (blinking)

Status

Action

The subject is too dark.

• Increase the ISO sensitivity.
• Use the flash.

The subject is too bright.

• Decrease the ISO sensitivity.
• Use a commercially available ND

filter (for adjusting the amount of
light).

The subject is underexposed. • Decrease the aperture value.

• Increase the ISO sensitivity.

The subject is overexposed.

• Increase the aperture value.
• Decrease the ISO sensitivity or use

a commercially available ND filter
(for adjusting the amount of light).

s0018_e_00_0_unified.book Page 125 Tuesday, March 18, 2008 4:08 PM

Summary of Contents for 262090





















































































































































Search results

Summary of Contents for 262090

Reviews:

Related manuals for 262090

Brands by name

Popular brands

Olympus 262090, Instruction Manual

Search results

Summary of Contents for 262090

Reviews:

Related manuals for 262090

Brands by name

Popular brands