![background image](http://html.mh-extra.com/html/olympus/262041/262041_instruction-manual_733784093.webp)
EN
93
Getting to know your camera better
8
Taking pictures of a subject against backlight
If the background is too bright compared to the subject, the exposure will be affected at the
bright parts and the subject will appear darker. This is because the camera determines the
exposure from the brightness of the whole screen.
• Set
[METERING]
to
[
n
]
(spot metering) to measure the exposure of the subject in the center of
the picture. To change the composition, place the subject in the center of the picture. While
holding down the
AFL
button, change the composition and press the shutter button.
g
“Metering mode
k
Changing the metering system” (P. 52)
• Activate the flash, set the flash mode to
[
#
]
(fill-in flash) and shoot the picture. You can shoot a
subject against backlight without the face of the subject appearing dark.
[
#
]
(fill-in flash) is used
for shooting against backlight and under fluorescent and other artificial lighting.
g
“Setting the flash mode” (P. 39)
Image turns out too bright or too dark
When taking pictures in
S
mode or
A
mode, the shutter speed or aperture setting displayed
in the control panel screen or viewfinder may blink. A red display means that the correct
exposure cannot be obtained. If you take the picture as is, the picture will appear too bright or
too dark. If that happens, change the aperture setting or shutter speed.
g
“
A
: Aperture priority shooting” (P. 31), “
S
: Shutter priority shooting” (P. 32)
Unknown bright dot(s) appear on the subject in the picture taken
This may be due to stuck pixel(s) on the image pickup device. Perform
[PIXEL MAPPING]
. If
the problem persists, repeat pixel mapping a few times.
g
“Pixel mapping
k
Checking the
image processing functions” (P. 99)
Additional shooting tips and information
Increasing the number of pictures that can be taken
The captured image will be recorded on the card. The following ways describe how to record
more images.
• Change the record mode.
The size of an image varies with the record mode. When you are not sure of the available card
capacity, change the image mode and shoot the picture. The smaller the
[PIXEL COUNT]
and
the bigger the
[COMPRESSION]
, the smaller the size of the image becomes. You can select
both in
[SQ]
of the record mode.
g
“Selecting the record mode” (P. 50)
• Use a card with large capacity.
The number of recordable images varies with the capacity of the card. Use a card with large
capacity.
Using a new card
If you use a non-Olympus card or a card used for another application, such as for a
computer, the message
[CARD ERROR]
is displayed. To use this card with this camera, use
the
[FORMAT]
function to format the card.
g
“Formatting the card” (P. 100)
Extending the useful life of the battery
Performing any of the following operations when not actually taking pictures can deplete the
battery power.
• Repeatedly pressing the shutter button halfway
• Repeatedly playing back the captured images over a long period of time
• Using the live view function over a long period
To save battery power, turn off the camera whenever it is not in use.
s0013_e_00_unified.book Page 93 Monday, March 5, 2007 10:04 AM
Summary of Contents for 262041
Page 132: ...Printed in China VH885101 ...