Olympus 262041 Page 41 Instruction Manual Download

Page: 41 / 132

Shooting functions

Various shooting functions

External electronic flashes (optional)

In addition to the camera’s built-in flash capabilities, you can use any of the external flash

units specified for use with this camera. This enables you to take advantage of a wider variety

of flash shooting techniques to suit different shooting conditions.

The external flashes communicate with the camera, allowing you to control the camera’s

flash modes with various available flash control modes, such as TTL-AUTO and Super FP

flash. The flash can be mounted on the camera by attaching it to the camera’s hot shoe.

Refer to the external flash’s manual as well.

Functions available with external flash units

Using the external electronic flash

Be sure to attach the flash to the camera before turning on the flash’s power.

Remove the hot shoe cover by sliding it in
the direction indicated by the arrow in the
illustration.

• Keep the shoe cover in a safe place to avoid losing it,

and put it back on the camera after flash shooting.

Attach the electronic flash to the hot shoe
on the camera.

• If the lock pin is protruding, turn the shoe lock ring as

far as it will go in the direction opposite to LOCK. This
will pull the lock pin back inside.

Turn on the flash.

• When the charge lamp on the flash lights up, charging

is complete.

• The flash will be synchronized with the camera at a

speed of 1/180 sec. or less.

Select a flash mode.

Select the flash control mode.

• TTL-AUTO is recommended for normal use.

Press the shutter button halfway.

• Shooting information such as ISO sensitivity, aperture

value, and shutter speed is communicated between
the camera and flash.

Press the shutter button all the way.

Optional flash

FL-50

FL-36

FL-20

RF-11

TF-22

Flash control
mode

TTL-AUTO, AUTO, MANUAL,

FP TTL AUTO, FP MANUAL

TTL-AUTO,

AUTO,

MANUAL

TTL-AUTO, MANUAL

GN (Guide number)
(ISO100)

GN50 (85 mm

)

GN28 (24 mm

)

GN36 (85 mm

)

GN26 (24 mm

)

GN20 (35 mm

)

GN11

GN22

* The focal length of the lens that can be covered (Calculated based on 35 mm film camera)

Notes

• The FL-40 optional flash cannot be used.

Notes

• The built-in flash cannot be used when an external flash is attached to the hot shoe.

Lock pin

Lock ring

s0013_e_00_unified.book Page 41 Monday, March 5, 2007 10:04 AM

Summary of Contents for 262041





































































































































Search results

Summary of Contents for 262041

Reviews:

Related manuals for 262041

Brands by name

Popular brands

Olympus 262041, Instruction Manual

Search results

Summary of Contents for 262041

Reviews:

Related manuals for 262041

Brands by name

Popular brands