![background image](http://html.mh-extra.com/html/olympus/226090-stylus-790-sw-digital-camera/226090-stylus-790-sw-digital-camera_instruction-manual_733731054.webp)
54
EN
Get
ting t
o
k
now
your camera bet
te
r
The flash is activated automatically when there is insufficient light, or when the camera is
shaken. To take pictures with no flash in dark places, set the flash mode to [
$
] and set as
follows:
Increase the [ISO] setting
g
“ISO Changing the ISO sensitivity” (P. 24)
There are several factors that can cause the picture to appear grainy.
Using the digital zoom to take close-up pictures
• With the digital zoom, part of the image is cropped and enlarged. The greater the
magnification, the grainier the picture appears.
g
“DIGITAL ZOOM Zooming in on your subject” (P. 25)
Increasing the ISO sensitivity
• When you increase the [ISO] setting, “noise”, which appears as spots of unwanted color or
unevenness in the color, can be introduced and give the picture a grainy appearance. This
camera is equipped with a function to allow shooting at high sensitivity while suppressing
noise; however, increasing the ISO sensitivity can result in some noise, depending on the
shooting conditions.
g
“ISO Changing the ISO sensitivity” (P. 24)
• The reason why there are sometimes differences between the actual colors and the colors
recorded in a picture is related to the light source illuminating the subject. [WB] is the
function that helps the camera determine the true colors. Normally, the [AUTO] setting
provides the optimal white balance, but depending on the subject, results may be better if
you manually adjust the [WB] setting.
• When the subject is in the shade on a sunny day
• When the subject is illuminated by both natural light and indoor lighting, such as when
near a window
• When there is no white in the center of the frame
g
“WB Adjusting the color of a picture” (P. 24)
• Take pictures with
K
in
s
mode. Suitable for taking pictures on a sunny day at the
beach or in the snow.
g
“
s
(Scene) Selecting a scene mode according to the shooting situation” (P. 23)
• Often, bright subjects (such as snow) turn out darker than their natural colors. Use
1
F
to
adjust toward [+] to make these subjects closer to their true shades. Conversely, when you
are shooting dark subjects, it can be effective to adjust toward the [–]. Sometimes, using the
flash may not produce the brightness (exposure) that was intended.
g
“
1
F
button Changing picture brightness (Exposure Compensation)” (P. 16)
• When [SHADOW ADJ. ON] is selected, the subject’s face appears brighter even against
backlight and the color of the background is enhanced in the picture. This function can also
be used to shoot a subject inside a home or building from outside.
g
“
f
Brightening the subject against backlight” (P. 17)
• With [ESP/
n
] set to [
n
], the picture can be taken based on the brightness at the center
of the monitor without being affected by the light in the background.
g
“ESP/
n
Changing the area for measuring the brightness of a subject” (P. 25)
• Set the flash to [
#
] to activate fill-in-flash. You can shoot a subject against backlight without
the face of the subject appearing dark. [
#
] is effective for shooting against backlight and
under fluorescent and other artificial lighting.
g
“
3
#
button Flash shooting” (P. 16)
Taking stabilized pictures without the flash
The picture is too grainy
Taking pictures with the correct color
Taking pictures of a white beach or snow scene
Taking pictures of a subject against backlight
d4343_e_0000_7.book Page 54 Monday, June 25, 2007 1:59 PM
Summary of Contents for 226090 - Stylus 790 SW Digital Camera
