160
E
The picture is too dark.
1
The flash was blocked by a finger.
[
Hold the camera correctly, keeping your fingers away
from the flash. (P. 70)
2
The subject was out of the working range of the flash.
[
Shoot within the flash working range. (P. 90)
3
The flash mode was set to the Off mode.
[
Check the flash mode before shooting. (P. 88)
4
The subject was too small and was backlit.
[
Set the flash to Fill-In mode. (P. 96)
The picture is too bright.
1
The flash was set to the Fill-In Flash mode.
[
Set the flash mode to one other than Fill-In Flash. (P.
88)
2
The subject was very bright.
[
Either adjust the exposure -1 or point the camera
away from overly bright subjects. (P. 84)
The colors of pictures taken indoors look unnatural.
1
The lighting fixture(s) affected the picture.
[
Set the flash mode to Fill-In. (P. 96)
The picture has obscured edge(s).
1
The lens was partly blocked by a finger or the strap.
[
Hold the camera correctly, keeping your fingers and
the strap away from the lens. (P. 70)
2
The shooting distance was too close.
[
Use the close-up compensation marks in the
viewfinder. (P. 106)
