OK
OK
108
E
PANORAMA MODE
The Panorama mode is provided as standard with the Olympus
SmartMedia. With it, you can use the provided utility software to
connect the pictures you took to make a panorama picture. You
must overlap the edges when taking pictures.
How to take panorama pictures
1
Press the Function button to select the Function card mode.
n
The LCD monitor turns on automatically.
2
On the D-320L, the connecting direction (right, left, up,
down) can be selected with the Previous (–)/Next (+) button.
n
The boxes appear on the LCD monitor.
●
The D-220L only supports shooting to the right.
3
Press the Function button again to cancel the Panorama
mode.
●
Up to 20 frames can be connected as a panorama picture.
Overlap the left end of the picture with the right end of the
previous picture (when shooting to the right).
Faire se chevaucher le bord gauche de la photo et le
bord droit de la vue précédente (chronologie de prise de
vues vers la droite).
Superponga el extremo izquierdo de la imagen con el
extremo derecho de la imagen anterior (cuando
fotografíe hacia arriba)
◆
The panorama mode is available only when a
Standard card is used.
◆
The provided C-20PU utility software is needed in
order to make panorama pictures.
◆
Because the exposure is determined by the first
picture, do not shoot overly bright/dark subjects
such as the sun in the first frame.
◆
Shooting many panorama pictures in the High
Quality mode consumes a lot of memory in the PC.
Use of the Standard Quality mode is
recommended.
◆
The flash cannot be used in the Panorama mode.
Note:
