52
Communication Driver Problem
[Windows 95]
Even if you install the USB driver on Windows 95, you cannot use the DS-2000 through the
USB connection.
[Windows 98,Windows Me and Windows 2000]
From the Windows [Start] menu, select
Settings,
Control Panel,
System
Next, find the DS-2000 (USBDSS Device for DS-150 and DSSUSB1 Device for DS-2000) at the
root of the [Device Manager] page and check that it is operating properly. If the DS-2000 is not
working properly, enable its use.
[Windows 95, and Windows NT 4.0]
From the Windows [Start] menu, select
Settings,
Control Panel,
Devices
Next, select the DS-2000 (USBDSS Device for DS-150/320 and DSSUSB1 Device for DS-2000)
under [Devices] and click [Hardware Profiles]. Check that the [Status] of the DS-2000 is
[Enabled]. If the [Status] is [Disabled], click [Enable] to set the [Status] to [Enabled].
Other Device Problems
For other device problems such as Smart Media Card and removable card, see the manual for
these devices.
Note that the DSS Player 2000 does not detect DS-150/320 recorders and SmartMedia Cards
connected via RS-232C.