Set the power switch to ON, which
will open the lens barrier. When the
camera is not in use, always set the
power switch to OFF so that the
shutter cannot be activated by acci-
dent and the lens barrier will be
closed to protect the lens.
When the power switch is set to ON,
the barrier opens and the lens shifts
out to the wide angle shooting
position.
While looking through the
viewfinder, aim the camera at the
subject you want to shoot.
8
Summary of Contents for 200
