Automatic flash
activation
(1) Taking pictures
in low light
When the flash mode is set
to AUTO, the flash will fire
automatically when there is
insufficient light
If there is insufficient light, the
flash indicator (orange) will light
when the shutter release button is
pressed lightly. If a picture-taking
situation is likely to result in the Red-
eye phenomenon," S" will blink
in the viewfinder. Switch to the
"AUTO-S" mode. (Refer to Page 25.)
Press the shutter release button fully
to take a picture.
• While the flash is being charged,
the flash indicator (orange) may
not light and the flash may not fire.
It takes about 0.2 — 3.5 seconds
after the film is advanced to charge
the flash (at normal temperatures).
16
Summary of Contents for 200
