7
Operation
Step 1.
Place the vamp in the hot station mould as shown in
Figure 1
Step 2.
Press the pedal to hold the vamp (Figure 2). Before
continuing the procedure be sure that the vamp is in the right
crimping position.
For correct placing release the pedal, correct the place of the
vamp and press it again.
2
1
3
Step 3.
Press the START buttons simultaneously and release
the pedal to complete the procedure. The machine will revert
to its initial position after the end of the setting time.
Maintenance
Once a week lubricate the rod of the cylinders
ASM-00694
with oil type SAE 30.
Once a week check the oil level of the air pressure lubricator
P1 and add oil type ISO Class V632 or ISO 3448 or something
similar.
Once a month clean the radiator.
Every six months check the good operation of the lubricator.
Note:
The lubricator must drip approximately one drop every 20
operation cycles.
Repeat the procedure in the hot and
cold station in order to stabilize the
materials
Tip:
Hot and cold is necessary either for leather or synthetic
vamps and helps maximize and retain the final shape of the
vamp and finally the shoe
VC-19D Operator’s manual
OLYMPIC
