4
Introduction
The purpose of this manual is to inform the owner of this
machine for its operation, its maintenance and for all the
safety regulations.
Please read carefully all the instructions and follow them in
order to use the machine properly in the production and avoid
any case of injuries.
Our company does not have any responsibility for any changes
happened on the machine by the owner, or actions which are
different to what this manual refers.
SAFETY REGULATIONS
This machine is intended for professional use only.
WARNING!
Only one operator may work on the machine at a
time.
WARNING!
Read and follow carefully all the relative
instructions to avoid serious injury.
Only qualified and authorized personnel must use the
machine.
Operators are expressly forbidden to use the machine
under the influence of alcohol or drugs capable of affecting
physical and mental capacity.
Keep unauthorized persons away from the work area.
Make sure that the machine has been installed in
compliance with the established legislation and
standards.
Always keep this user manual in a place where it can be
readily consulted when working on the machine. Consult it
whenever you are in need of information or explanation.
Do not remove or deface the safety, danger, warning or
instruction signs. Replace any missing or illegible Danger,
Warning or instructions signs.
Never use the machine if you notice any damaged electric
wires.
Never install the machine outdoors or in any place with a
lot of moisture.
WARNING
Use only original spare parts, which can be
supplied by the manufacturer or the local agent.
Otherwise, your machine will not be a CE product.
WARNING
The machine frame must be earthed using the
outside connection point marked according to
the CE norms.
Electric and pneumatic connections
1. Connect the machine (SINGLE PHASE 230V - 50Hz).
2. Before plugging in the machine, check that the main
supply voltage is the same as that indicated on the
label situated on the back side of the machine.
3. Check if the plug and socket have the same technical
type. If not, use the suitable adapter after having
consulted a certified electrician.
4. To disconnect the machine, turn the main switch off and
remove the plug from the outlet.
5. Connect the machine to air pressure 6 - 8bar.
6. Connect the proper pneumatic hose. Set the main
pressure regulator, which is found, on the back part of the
machine to 6 Bar.
VC-19D Operator’s manual
OLYMPIC
