8
Positioning the Warning Lamp
Set or lay the warning lamp down on a suitable surface�
If you want to hang the warning lamp up, use the loop
or magnetic surface provided on the rear side�
Selecting a Flashing Scenario
The warning lamp is provided with 9 different flashing
scenarios as well as a torch function. Select the flashing
scenario in the following sequence:
360° rotating beacon
à
3-flash mode
à
1-flash mode
à
alternating flash mode
à
SOS Morse code
à
pow-
erful continuous light
à
weak continuous light
à
contin-
uous light (2 LEDs)
à
continuous light (4 LEDs)
Press and hold the operating mode button on the front
of the warning lamp for about 2 seconds to switch the
warning lamp off�
Flashing scenarios
Press the operating mode button on the front of the
warning lamp, several times if necessary, to activate the
flashing scenario required.
Pay attention to the service life of the batteries in Chap-
ter “Battery Service Life”� Change the batteries when
the LEDs light up weakly or not at all�
Torch
The torch can be switched on individually or supple-
mentary to a light scenario�
1
Press the operating mode button on the front of the
warning lamp twice to switch the torch on�
2
Press the operating mode button on the front of the
warning lamp twice, again, to switch the torch off�
Switching the Warning Lamp Off
Press and hold the operating mode button on the front
of the warning lamp�The warning lamp is switched off�
Battery Service Life
The following table indicates the maximal service life
(operating period) of the batteries for continuous op-
eration. The values specified are guideline values and
could deviate depending on the environmental condi-
tions, quality and/or charge status of the batteries used�
Scenario
Battery service life
360° rotating beacon
8 hours
3-flash mode
8 hours
1-flash mode
25 hours
Alternating flash mode
8 hours
SOS Morse code
12 hours
Powerful continuous light
7 hours
Weak continuous light
20 hours
Continuous light (4 LEDs) 18 hours
Continuous light (2 LEDs) 25 hours
Torch
20 hours
Technical Data
Power supply
3x batteries, AAA (1�5 V)
Flashing scenarios
9 (via 12 LEDs)
Dimensions
105 x 105 x 35 mm
Weight
166 g (including batteries)
Battery service life
Refer to "Battery Service Life"
Cleaning
Clean the surfaces of the housing with a dry, soft, lint-
free cloth� Do not use any solvents or cleaning agents�
Declaration of Conformity
Conformity of the equipment to the EU
directives is confirmed by the CE mark. The
Declaration of Conformity for this product is
available at
www.olympia-vertrieb.de
G
