Olympia OL2420, Owner'S Manual

Page: 53 / 165

53
8 Consumer Information
This equipment complies with Part 68 of the FCC rules and
the requirements adopted by the Administrative Council for
Terminal Attachments (ACTA). On the back of this
equipment is a label that contains, among other information, a
product identifier in the format US: 2X6WI00B2G4C230X. If
requested, this number must be provided to the Telephone
Company.
An applicable certification jack Universal Service Order
Codes (USOC) for the equipment is provided (i.e., RJ11C) in
the packaging with each piece of approved terminal
equipment.
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the
ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See
installation instructions for details in section (3).
The Ringer Equivalence Number (REN) is used to determine
the number of devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result in the
devices not ringing in response to an incoming call. In most,
but not all, areas the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact
the local Telephone Company. The REN for this product is
part of the product identifier that has the format US:
2X6WI00B2G4C230X. The digits represented by 00 are the