Olympia Moca D, Owners Book

Page: 7 / 16

13
Owner’s book • 01 Moca
In order to obtain a perfect espresso, the grind setting needs
to be checked regularly and if necessary, adjusted, to avoid
problems with too fi ne or too coarse espresso. This procedure
may be necessary a few times within a week if the meteor-
ological conditions (humidity, temperature etc.) change
considerably.
Fill the bean hopper
2
with roasted coffee beans. The
lid
1
seals the bean hopper
2
. The hopper can contain
about seven ounces of beans.
In order to regulate the grind, turn the grind coarseness
dial
5
on the right side of the grinder
3
. Big dots indicate
a coarse grind, small dots a fi ne grind.
If you want to change the grinding burrs towards a fi ner grind,
please do this when the motor is running in order to prevent
beans from being squashed between the grinding burrs.
The optimal dosage for an espresso is 7,5 to 9 g.
Grind setting,
dosage and
other tips.
12
To enjoy the perfect espresso, we recommend the following
steps:
1. Carefully take your coffee grinder out of the packaging.
Remove all additional transport protection, e.g. plastic fi lms.
Remove foreign objects from hopper if there are any.
2. Carefully read all the user manual.
3. Place the coffee grinder on an even and slip-proof surface
that is easy to clean.
4. Put the glass bean hopper
2
into the opening on the
grinder
3
and turn the container until it stops. The grinder
works only when the container is screwed in. Slide the
collecting vessel
8
between the feet
7
of the machine.
5. Fill coffee beans into the bean hopper
2
and put on the
lid
1
. Take care always to leave the lid on when grinding.
6. Plug in and switch on the appliance. When switched on I
the appliance is ON, when switched on the aplliance is OFF.
7. Put the portafi lter onto the two rests
9
, pressing it against
the button
10
. When the basket is suffi ciently fi lled (small
cone above the fi lter edge), pull away the portafi lter.
Please observe the following information:
• The domestic coffee grinder is only intended for stationary use.
Installation in vehicles of any kind is not admitted.
• For cleaning and servicing the machine must be disconnected
from the power supply system by removing the plug from the
power socket.
Getting started.