manualshive.com logo in svg

Olympia DECT 5000, Manual, Page: 12 / 40

Share
Download
Olympia DECT 5000 Manual Download Page 12

12

Putting the Telephone into Operation

CONNECTING THE BASE STATION

DECT 5000

Putting the Telephone into Operation

The DECT 5000 cordless telephone is comprised of a base station and a handset� Connect 

the base station and handset as described in this section�

Connecting the Base Station

Well deciding on the installation location, take the range of the base station into account� It 

has a range of about 50 metres but this can be reduced by walls or ceilings, for example� 

1 

Connect the telephone line connection cable to a telephone line connection socket� Alter-

natively, connect the base station to a telephone system or a router� Further information 

is provided in the operating manual supplied with the respective device� 

WARNING! Only use the power adapter supplied! 

The power adapter may only 

be used with power sources which comply with the information on the rating plate� 

Never attempt to operate the phone using a different voltage� 

2 

Connect the power adapter connector to the power adapter socket in the base station 

and to a properly installed power socket�

Summary of Contents for DECT 5000









































Reviews:

No comments