Olympia DECT 5000 Page 5 Manual Download

Page: 5 / 40

For Your Safety

OBSERVE SAFETY INSTRUCTIONS

DECT 5000

WARNING! Risk of suffocation! Risks to health from batteries!

Keep batteries

out of reach of children� Do not swallow batteries� If a battery has been swallowed,

seek medical assistance immediately�

WARNING! Only use the power adapter supplied!

The power adapter may only

used with power sources which comply with the information on the rating plate�

Never attempt to operate the phone using a different voltage�

CAUTION! Risk of explosion through improper replacement or removal of the
batteries!

Only use the rechargeable batteries supplied and only replace the

rechargeable batteries with a type approved by the manufacturer�

CAUTION! The ringing tone is issued via the loudspeaker.

Take an incoming

call first and then hold the phone to your ear. This prevents any possible hearing

damage�

IMPORTANT! Protect the phone

from moisture, dust, liquids, chemicals, vapours,

heat and direct sunlight� The phone is not waterproof; therefore, keep it dry�

IMPORTANT! Only use original accessories

� Only connect accessories approved

by the manufacturer�

IMPORTANT! Repairs to the phone

may only be completed by properly qualified

service personnel�

Summary of Contents for DECT 5000









































Search results

Summary of Contents for DECT 5000

Reviews:

Related manuals for DECT 5000

Brands by name

Popular brands

Olympia DECT 5000, Manual

Search results

Summary of Contents for DECT 5000

Reviews:

Related manuals for DECT 5000

Brands by name

Popular brands