Olympia CPD 435, Operating Instructions Manual

Page: 6 / 26

6
Changing the ink ribbon
When the print is faded, change the ink ribbon!
Æ
Switch the calculator off.
Æ
Open the top cover by pushing it back. (Fig. 1).
Æ
Remove the old ink ribbon by pulling it up. (Fig. 2).
Æ
Insert the new ink ribbon and press it carefully until it
engages. IR-40T (Fig. 3).
Æ
When the ink ribbon is positioned correctly, slide the
housing cover back on and insert the leading edge of pa­
per. (Fig. 4).
Inserting the paper roll
ATTENTION!
• Damage to the print head
Æ
Never actuate any keys (except the Paper
Feed key) when the printer is switched on.
Æ
Pivot the paper roll holder to the rear. (Fig. 5).
Æ
Mount the paper roll on the paper roll holder. (Fig. 6).
Æ
Cut the leading edge of the paper roll straight using a
pair of scissors and slide the leading edge in the slit in the
calculator. (Fig. 7).
Æ
Press the Paper Feed key until the leading edge of the
paper roll comes out of the top section of the calculator.
(Fig. 8).
Technical properties
Power supply Power adapter plug or 4 AA
batteries (R6)
Power adapter
plug 6 V
DC
, 300 mA
Power consump­
tion 2.4 W
Display 12-character, large LCD display
Dimensions
(L x W x H) 232 mm x 165 mm x 64 mm
Ink ribbon IR-40T
Paper roll Width: 58 mm
Diameter: 50 mm to 80 mm