CDP24106 USER GUIDE Errata Sheet
CDP System does
not
include a V90 modem
CDP System does
not
support: Dial Up Networking (DUN); Personal Area Network Profile
(PAN); Cordless Telephony Profile (CTP); Object Exchange (OBEX)
The CDP is
not
user-upgradable
Pg. 12
What about security?
The Base is set to be discoverable by pressing and holding the
page
Button for 10 seconds. The ‘envelope’ icon flashes and you’ll hear a
Beep to confirm the base is discoverable.
Pg. 42
North American dialing
feature is not supported
Pg. 45
Registration
9.
Press and hold down
page
on the base station until the
‘
envelope
’ icon flashes and you hear a beep.
10.
After the ‘
envelope
’ icon flashes (not ‘mute’)…….
Pg. 52
Bluetooth functions – Device pairing
1.
Press and hold the base
page
button for 10 seconds. The
‘envelope
’ icon will blink to show the base station is discoverable.
Headset pairing
1.
On the CDP handset, select
MENU
→
BS SETTINGS
→
BLUETOOTH
→
ADD HEADSET
.
2.
Put the headset into pairable mode (see headset user guide).
3.
On the CDP handset, select
NEXT
to enter the PIN screen.
4.
Enter the headset
PIN
code; the base station will beep while
it is searching. A final
high
pitched beep will indicate success;
a
low
pitched beep indicates failure.
5.
If the procedure completes successfully, the headset will
terminate
the
pairing
mode.
If pairing fails, check your
headset PIN code and pairing instructions, then try again.
6.
Press the headset call control button to activate headset
coordination with the CDP base. You may have to power
cycle the headset, base, or both. Your headset will now
receive calls via the base station.
Pg. 55
Base station
does
not
have a Flash feature
