Pulse/Tone
If your exchange requires your phone to use pulse Dialing but during a call your need to enter tones (e.g.
for a call center, etc.), you can switch to tone Dialing temporarily as follows:
1.
When a call has been connected, press
until the
pulse/tone option is displayed.
2.
Press
to switch between tone and pulse
modes as required.
Intercom
For information on intercom calls, see opposite.
Flash
O
The flash option is equivalent to flashing the hook switch on a corded phone
(see page for details).
1.
When a call has been connected, press
until the
flash option is displayed.
2.
Press
to use the flash option.
Check with your service provider for available services.
Intercom
The intercom function is available between handsets.
O
For the intercom function to be available between handsets, you must have
purchased at least one extra handset and registered it to your base station.
For details on extra handsets, see page 45.
Handset intercom calls
On a handset, there are two ways to set up an intercom call: during a call (from the in-call menu) or
directly from the system menu.
Accessing Intercom (in-call menu)
To make an intercom call from a handset during a phone call, proceed as follows:
1.
With a call connected, press
until the intercom
option is displayed.
Accessing Intercom (system menu)
To make an intercom call from a handset in standby mode, proceed as follows:
1.
Press
until the menu option is displayed then
press
.
2.
Press
until the intercom option is displayed.
Now proceed as follows:
USER
Page 24
www.olympiaphones.com
GUIDE
Making calls
